Connect with us

How to Keep Your Pool in Tip-Top Shape This Summer?

Swimming pool maintenance


How to Keep Your Pool in Tip-Top Shape This Summer?

Chlorine or bromine, saltwater or non-saltwater, above ground or in-ground–these are just some of the decisions you’ll need to make when keeping your pool in tip-top shape this summer. Pools can be amazing investments and fantastic sources of entertainment, but they also require lots of upkeep if you want them to last. To help you with all the details of keeping your pool in tip-top shape this summer, we’ve put together these tips on how to keep your pool in tip-top shape this summer with pool maintenance Melbourne!

Tips for the Pool maintenance:

Test Water Quality

If you haven’t had your water quality tested, or if it’s been a while since you had it checked, have a local lab perform an analysis. The results will give you some idea of what needs addressing—whether it’s pH levels, sodium content, etc.—and also help you decide which additives to use. Before adding any chemicals to your pool, be sure that they are compatible with one another and won’t react adversely.

Test pH Levels

For a happy, healthy pool, you want your water’s pH level to be between 7.2 and 7.6. If it’s too high or too low, your pool water can irritate swimmers’ skin and damage their hair; it can also accelerate corrosion of any metal parts in your equipment. Test pH levels every other week during summer months or at least twice a month all year round.

Test Alkalinity and Calcium Levels

You’ll want to know your pH level, but you also want your calcium and alkalinity levels to be as close as possible. Over time, either one can get out of whack, meaning that your water’s ability to conduct electricity or heat will be impaired. Pool repairs melbourne is easy: Use a pool salt test kit (available at any hardware store) and monitor these levels regularly.

Check Your Filter

Weakened or clogged filters are one of the most common causes of pool problems. If your filter hasn’t been cleaned or replaced since last summer, it may be time for an upgrade. Many people wait until there is a problem before they check their filters—but it’s better to catch issues before they occur and keep your pool running smoothly all season hence do pool maintenance Melbourne regularly.

pool maintenance

Make Sure Filtration System Is Properly Sized

Make sure your pool filtration system is properly sized. Overly small or undersized filtration systems aren’t capable of removing suspended particles, dirt and contaminants from your pool water.

Empty the Skimmer Basket Regularly

Chances are, you’re going to need to empty your skimmer basket every single day. This can be tiresome (especially if you have a large pool), but it’s an important part of keeping your water balanced and clean. Skim off any excess debris or algae from time to time, then refill with fresh water. By doing so regularly, you’ll avoid extra strain on your pump and will help keep your pool cleaner for longer.

Every autumn, leaves fall into your swimming pool. These fallen leaves can collect on top of your water and sink to the bottom over time. When you start your swimming season, you will have a natural barrier that slows down or stops water circulation through your filtration system. Eventually, if you don’t remove these leaves, they could clog up your pump and other equipment that runs off of water pressure.


It’s summertime and pool season is here. While it’s nice to have some fun in the sun, you should also know how to properly do pool maintenance Melbourne so that you don’t end up spending more money than expected on repairs. Follow these tips and your pool will stay clean all summer long. Happy swimming!

Continue Reading
You may also like...

More in Uncategorized

To Top